New acquisitions and projects.

 I know, I know, it's been a while. 

 Life gets in the way and all that.

 

Since I last posted, hmm, 

 New equipment (that I can remember, there is more):

FTDX10

Anytone AT5888UV

Retevis RT95

Baojie thing

FT450

VR5000

IC-R72

Fairhaven RD500

Astron RS35 

And, the current favourite, purely because it's so hackable, an AKD 2001 2M FM set which is due to arrive in the next day or two. 

 

All the big name stuff is nice, I love the FT-DX10 for example, the Anytone and Retevis are cracking little radios and great value but for pure fun, the AKD looks to be possibly the best value of all and I've got plans for it which include replacing the original PIC 16C55 microcontroller, I may even document them here.

 

 

 

 

 

Comments

Post a Comment

Popular posts from this blog

MiniPA 70 build, almost there.

Image
A quick update, I needed a heatsink so I found one from an old PC which is more than adequate, weighing in at almost 650 grammes I reckon it should be able to handle the heat. Problem though, it's not flat. Which makes it kind of difficult to mount the board. Now, I could use some standoffs, PCB pillars cut to length but I'm a little light on machine tools to make an accurate job of it and it'd annoy me that it was 'wobbly'. As it happens, I recently bought myself a new toy. A Flashforge 3D printer so this seemed an ideal opportunity to learn to use a CAD program and find out how dimensionally accurate the printer is. It turns out, it's pretty good. And the PLA takes a thread really nicely. So, my Mini PA board now has mounts, I just need to drill and tap some holes in the heatsink.
Read more

Opto-isolated RS-232 for Icom CI-V

Image
First thing I should say, this is my 'design' and I offer no guarantee that it will work for you, be careful if you build one, do your own testing to be certain it's not going to blow up your laptop and or radio, cause a rift in space time and the instant destruction of the entire universe as we know it. OK, guff out of the way, the Opto Isolated CI-V Interface I mentioned earlier, And the schematic! It's rough, hand drawn and there have been a couple of changes to component values, mainly because I found a document that suggests the CI-V interface port on the radio shouldn't have to sink more than 2.5mA, so one resistor has been changed (the 680R on pin 2 of the right hand side opto is now 2K) and another removed completely (the pull up on pin 5 of the left hand side opto) to comply with that. If I short the CI-V line with my ammeter, I get this: 1.6 milliamps, I'm comfortable with that. Currently (yeah yeah) it works reliably as a serial loop...
Read more

3D printing the things.

Image
I bought a very cheap Yaesu VX1-R dual band handy last year, it's a cute little thing that covers 2 and 70 but unfortunately it came without the battery. No problem, if it works I'll just buy a replacement, simple. But WOW, the FNB-52 battery is *expensive*, more than three times what I paid for the radio and I could not find one in stock anywhere (I have since found them)... I did find out that the battery pack is a standard 14650 Li-Ion cell in a molded plastic case (presumably including a battery management circuit) and a quick search of everyone's favourite tat bazaar eBay found a pack of two for a not expensive £9 so I ordered some and waited. When they arrived I gave them a few hours on charge and then tried one in the handy, it worked but of course it rattles about and runs the risk of being damaged or, worse, exploding if charged incorrectly as the cell isn't 'protected'. Now I do have a charger but it meant I'd have to remove th...
Read more